GD_202201_Sungrow SBR HV Battery Parallel Extension Manual_V1.1 Page 3 of 18
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our services, changes to this document may occur without notice.
1.3 Mounting the Combiner Box
step 1 Install the wall-mounting bracket and mount the Combiner box to the bracket.
1.4 Terminal Description (Combiner Box)
All electrical terminals are located at the bottom of the combiner box.
figure 1 Terminals at the Bottom of the Combiner Box
* The image shown here is for reference only. The actual product received may differ.
To Next Page
