11
26. Plug the heaters into the outlets.
27. Attach the cup holder and other accessories to a wall using a screw.
4.2 Installing Accessories
Although there are small pre-drilled holes for the placement of these items, the
Towel Rack, Magazine Holder, and Cup Holder can be placed wherever you
prefer as long as you do not damage the wood. If installing in a different location,
it would be a good idea to pre-drill the holes before you tighten the screws. The
Oxygen Ionizer should be installed in the upper left of the Back Panel, where
there is a small wire that should be fed from the Top Panel.
Congratulations! The Installation is Complete!
To Next Page
Loading...
