19
POWER-CORD PROTECTION – Power supply cords should be routed so they are not
likely to be walked on or pinched.
LIGHTNING – For added protection for this product during a lightning storm, or when it
is left unattended and unused for long periods of time, unplug it from the wall outlet.
OVERLOADING – Do not overload wall outlets and extension cords as this can result in
a risk of fire or electrical shock.
SERVICING – Always unplug this product from the wall outlet before servicing the
product.
POWER SUPPLY – Do not remove power supply covers. No user-serviceable parts are
located inside the power supply.
REPLACEMENT PARTS – When replacement parts are required, only use parts
specified by the manufacturer. Unauthorized substitutes could result in fire, electrical
shock or other hazards.
SAFETY CHECK – Upon completion of any service or repairs to this product by a
service technician, ask the technician to perform safety checks to make certain that the
product is in proper operating condition.
9.0 Electrical Specifications
Voltage, 50-60 Hz
(dedicated circuit)
If a dedicated electrical outlet is required, it should be installed with a GFCI by a
licensed electrician. Failure to do this will void the warranty.
To Next Page
Loading...
