sunjoe HJ602C - Grass Shear + Shrubber Safety Warnings; Appliance Specific Safety

3
8. Do not disassemble the charger. If the charger requires
service or repair, contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563). Incorrect reassembly poses a
risk of electric shock, electrocution or re.
9. To reduce the risk of electric shock, unplug the charger
from the outlet before cleaning the unit.
10. Never attempt to connect two (2) chargers together.
11. DO NOT store or use the tool and battery pack in
locations where the temperature may reach or exceed
104 ºF (40 ºC). Dangerous storing locations include
outdoor sheds or metal buildings in the summer.
12. The charger is designed to operate on standard household
electrical power (120 V). Do not attempt to use it with any
other voltage!
NOTE: The integrated battery is not fully charged out of
the carton. Read the safety instructions and then follow
the charging notes and procedures.
13. The longest life and best performance can be obtained if
the integrated battery is charged when the air temperature
is between 64.4 ºF – 75.2 ºF (18 ºC – 24 ºC). Do not
charge the battery pack when the air temperature falls
below 50 ºF (10 ºC) or above 104 ºF (40 ºC). Following
these safety measures will prevent damage to the
battery pack.
14. Do not incinerate the integrated battery even if it is
seriously damaged or completely worn out. The battery
can explode in a re.
Grass Shear + Shrubber
Safety Warnings
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for
their safety.
• Carry the machine by the handle with the cutter blade
stopped. Use the cover when transporting or storing the
tool. Proper handling of the machine will reduce possible
personal injury.
• During operation, hidden objects in shrubs, like wire and
cable, can be accidentally cut by the blade.
• Keep supply and extension cords at a safe distance from
the cutting attachment.
• Only use the tool in daylight or in good articial light.
• Before turning the tool ON and during operation,
make sure all body parts are at a safe distance from
the cutting attachment.
• Always ensure that the ventilation openings are clear
of debris.
• Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.