21
ISSUE SOLUTION
An electrical component is
not working after assembling
Check all connections - see pg. 10. A newly
assembled unit with a non-functioning electrical
component (control panel, heater panels, lights,
speakers) will most likely have a missed or loose
connection.
Slow warm up time
Ensure each wall panel is heating and that you
have the CORRECT electrical specs on a DEDI-
CATED OUTLET - see pg 4.
Sauna has no power
There could be a tripped breaker due to a power
surge or not being plugged into a dedicated
outlet. Flip the breaker switch (a black reset but-
ton located to the left of the power box on the
roof.) If there is still no power, check the power
cord connections on the roof and make sure they
are secure. Also verify the outlet power.
Stereo won’t accept CD
On the top of the stereo there is a yellow sticker
pointing to two shipping screws that need to be
removed. Once removed, the CD will be taken
correctly.
For other troubleshooting questions, please submit to customer care at
www.sunlighten.com/support.
TROUBLESHOOTING GUIDE
To Next Page
Loading...
Need help?
General
