7
SAUNA ASSEMBLY
The following pictures are used for your reference. Please review before
assembling your sauna.
1. INSTALLING THE FEET
Install screw through wooden feet into designated holes on the bottom of
the floor panel.
2. PLACING THE BOTTOM PANEL
Place bottom panel on a smooth flat surface. A taped covering on the top of the
floor panel and white sticker on the edge indicates the back of the sauna base.
Before proceeding, double check that the base location is in it’s final position.
Make sure that the base is level to avoid any parts becoming misaligned.
Leave enough space around your sauna to plug in the power cord and
for any maintenance once it is assembled.
WARNING:
Heater grate must be installed prior to
stepping on the floor.
Remove taped wire cover panel
in back-right corner.
To Next Page
Loading...
Need help?
General
