Sunlover oasis IX9 - Page 20

Page 19 of 43
Controller Operation
Adjusting the Target Set Temperature
The setpoint can be changed in either ON or OFF mode in increments of 0.5°C.
To change the desired pool temperature, swipe across to the right and touch the Temp Setting key.
Adjust the temperature setting by swiping up and down and press OK to save.
Press  once (x1) to return to the home screen.
Time and Date Settings
The setting for date and time can be configured in either ON or OFF mode.
To adjust the time and date, swipe across to the left and touch the Time Setting key.
Adjust the date and press OK to continue. Adjust the time (note this is a 24-hour clock) and press OK
to save.
Press  once (x1) to return to the home screen.