To Next PageTo Next PageWhat to do if the Sunny Premium SF-E3919 Fitness Equipment elliptical climber makes a squeaking noise?
If your Sunny Fitness Equipment elliptical climber is squeaking, the bolts may have loosened. Inspect all bolts and tighten any that are loose.
How to fix a Sunny Premium SF-E3919 Fitness Equipment elliptical climber that wobbles?
To stabilize your Sunny Fitness Equipment elliptical climber, adjust the end caps on the rear stabilizer as needed to level the machine.
How to troubleshoot a Sunny Premium SF-E3919 meter with no display?
If the meter on your Sunny Fitness Equipment isn't displaying anything: 1. Ensure the computer wire is properly connected to the wire from the upright post. 2. Check that the batteries are correctly positioned and making contact with the battery springs. 3. Try replacing the batteries with new ones, as the current batteries may be unresponsive.
General| Brand | Sunny |
|---|---|
| Model | Premium SF-E3919 |
| Category | Fitness Equipment |
| Language | English |
Attach Front and Rear Stabilizers to the Main Frame using specified bolts and washers.
Attach the Upright post and Bolt Caps to the Main Frame using specified hardware.
Attach the Left and Right Pedals to their respective Pedal Tubes using bolts, washers, and nuts.
Attach the Left and Right Handlebars to their respective Swing Rods using carriage bolts, washers, and nuts.
Connect sensor and pulse wires to the Computer and attach it to the Upright Post.
Adjust resistance by rotating the Tension Control Knob clockwise to increase and counter-clockwise to decrease.
Adjust balance using the Left and Right End Caps for Rear Stabilizer if the climber is unbalanced.
Tilt the climber to engage front stabilizer wheels for easy transport.
Clean with a soft cloth; avoid abrasives. Inspect bolts and pedals weekly.
Store the elliptical climber in a clean, dry environment away from children.
Details on using MODE, SET, and RESET buttons for various computer functions and data entry.
Guide to entering personal data and performing body fat percentage and BMI tests.
Activate heart rate recovery test after pulse signal by pressing any button.
Explanation of SCAN, TIME, RPM, SPEED, DISTANCE, CALORIES, PULSE, CALENDAR, CLOCK, TEMPERATURE.
Instructions on powering on, setting current data, and pre-setting target values for exercise.
