Sunny SF-E3608 User Manual

MAGNETIC ELLIPTICAL TRAINER
SF-E3608
USER MANUAL
WARNING! Your elliptical trainer is not designed for reverse pedaling. Failure to
comply with this warning may result in permanent damage to your new equipment.
IMPORTANT! Read all instructions carefully before using this product. Retain
owner’s manual for future reference. For customer service, please contact:
support@sunnyhealthfitness.com

Sunny SF-E3608 Specifications

General

Brand	Sunny
Model	SF-E3608
Category	Fitness Equipment
Language	English

Summary

Important Safety Information

Exploded Drawing

Parts List

Hardware Package & Tools

Assembly Instructions

Step 1: Front and Rear Stabilizer Attachment

Attach front and rear stabilizers to the main frame using specified bolts and washers.

Step 2: Front Cover and Handlebar Post Installation

Install front cover, connect wires, and attach handlebar post to main frame with bolts and washers.

Step 3: Swing Tube and Pedal Connection

Connect swing tubes and pedal supports to cranks, then attach pedals using hardware.

Step 4: Handrail and Handlebar Attachment

Attach handrail to handlebar post and connect handlebars to swing tubes using bolts, washers, and nuts.

Step 5: Computer and Wire Connection

Connect computer wires and mount the computer console to the handlebar bracket.

Exercise Monitor Functions

Exercise Procedures

Warm-Up Phase Guidance

Gradually adjust the body to exercise demands and reduce injury risk with stretching.

Cool-Down Phase Guidance

Wind down the cardiovascular system and muscles by reducing intensity and repeating stretches.