To Next PageTo Next Page
Need help?Do you have a question about the Sunny SF-RW5727 and is the answer not in the manual?
General| Type | Rowing Machine |
|---|---|
| Resistance Type | Magnetic |
| Resistance Levels | 16 |
| Drive System | Belt |
| Display | LCD |
| Display Metrics | Time, Count, Calories, Total Count, Scan |
| Batteries | AA |
Attach Front Stabilizer (1) to Main Frame (2) using 2 Screws (43) and 2 Washers (45).
Attach Rear Support (3) to Main Frame (2) using 4 Screws (43) and 4 Washers (45).
Remove 2 Screws (46) and 2 Washers (47) from Meter (34) with Allen Wrench (14).
Attach Meter (34) onto Meter Support (5) using 2 Screws (46) and 2 Washers (47).
Connect Link Wire (E) with Trunk Wire (35). Attach Meter Support (5) to Main Frame (2).
Insert Bolts (53) into Main Frame (2). Insert Foot Rest Shafts (16) through Pedals (28, 29).
Attach Handlebars (6) to Rotating Armrest (4) using Bolts (54), Washers (52), and Nuts (55).
Attach Seat (19) to Seat Support (8) using 4 Screws (43) and 4 Washers (45).
Adjust Pedal Straps (48) for user's foot/shoe size by pulling them.
Turn Adjustment Knob (C) on Hydraulic Cylinder (13) to set tension level (1-12).
Details TIME, COUNT, CALORIES, REPS/MIN, TOT. CNT specs and defines TMR, CNT, CAL, TOT.CNT, CN/M functions.
Monitor requires 2 AAA batteries; replace both simultaneously and do not mix types or old/new batteries.
