To Next PageTo Next Page
Need help?Do you have a question about the Sunny SF-B1001S and is the answer not in the manual?
General| Brand | Sunny |
|---|---|
| Model | SF-B1001S |
| Category | Exercise Bike |
| Language | English |
Attach front and rear stabilizers to the main frame using bolts and washers.
Assemble the handlebar and attach it to the handlebar post and frame covers.
Mount the seat onto the seat slider and attach the seat post to the main frame.
Use foot levelers to ensure the bike is stable on the floor surface.
Control resistance with the brake knob and use it for emergency stops.
Modify seat height and fore/aft position for optimal comfort and exercise.
Safely exit the bike after it has completely stopped.
Raise or lower the handlebar to the desired riding position.
Securely fasten the foot straps in the toe clips for safe pedaling.
Transport the bike by tilting it onto its front wheels.
Wipe down equipment after each use to prevent sweat damage.
Check hardware, inspect tension rod, clean/lubricate seat post and slider.
Tighten hardware, clean/lubricate pop pin assemblies, treat resistance pads.
Maintain brake pads by cleaning and lubricating them as needed.
