Sunphor SUP58T2 - User Manual

1
58mm Thermal Printer Series
Manual
(SUP58T1/ SUP58T2/ SUP58T3)
VERSION 2.0.01
July 2010
Copyright of this manual remains with Sunphor, reproduction of any section of this manual is prohibited
without prior written permission of Sunphor.
While all care has been taken to ensure the accuracy of this user manual, the continual development of
this product may reflect some inaccuracies.
Sunphor takes no responsibility for the inaccuracies and will Endeavour to update this user manual
periodically. Further assistance can be supplied by your local dealer.

Summary

Technical Parameters

Connection of the printer

Installation of Paper Roll

Driver Installation

Select Printer Type SUP58 T2 Series

Steps to select the printer type and configure ports in the OS.

Check Printer Installation Success

Verifying successful printer installation and port settings.

Baud Rate Setting

Configure COM Port Selection

Selecting the correct COM port in the printer properties.

Set Printer Baud Rate

Configuration Program Iprinter.exe

Select Communication Port

Set Baud Rate

Set Ethernet IP Address

Set or Change Language Code Page

Set Baud Rate for Pos58

IP Address Tool Printer.exe

Establish Printer-Computer Connection

Adjust Computer IP Address

Select Printer Type and Port

Enter New Printer IP Address

Entering the desired IP address for the printer.

Self-test Operation

Printer Cleaning

Sunphor SUP58T2 Specifications