Menu button
Clock button
C
Timing button
Temperatures ≥
15
.
.
You can start or shut down the controller on the main interface.
to the main interface by pressing the
When shutting down, press the button for 5 seconds
The menu button has both “ ”and “ ” , which can be used to see all options.
You can push the “M button, SET” button with “ button to set different functions. When
starting, set the water temperature using these buttons within a range of 28 – 55℃, the initial
value being 50℃.
” “ ”
On the main interface, press this button to set the clock and systematic parameters.
-
to the set temperature, will change the system.
To Next Page
Loading...
