No. 7, Road 12, Industrial Zone, Taichung City 407, Taiwan
Tel: 886-4-2359-1190 sales@sunriseiw.com.tw
Fax: 886-4-2359-3409
www.sunriseiw.com.tw
- 1 -
INTRODUCTION
The Sunrise Ironworker is a hydraulically powered punching and metal
shearing machine. The machine is equipped with Punching, Flat Bar
Shearing, Angle Shearing, Round Bar / Square Bar Shearing, and Notching
stations (on IW-45M, the notcher is an optional tooling installed at the
punching station). This multi-function aspect allows the Sunrise
Ironworker to meet the diversified needs of the metal forming industry.
There are many optional accessories that will further increase the versatility
of the machine, contact our dealer for details.
Each machine has been individually tested in the factory and under-gone an
extensive pre-delivery check to ensure that the machines meet the highest
quality standard. The ironworker has been designed to be a reliable and
dependable machine with excellent performance. We know the working
quality of the machine will confirm that you have made a good choice by
selecting Sunrise products for your facility.
In order to have a better understanding of the operating procedures, to
obtain maximum benefits from the machine, and to minimize the
maintenance cost of the equipment, please have the operators and engineers
read this Manual thoroughly and carefully before operating the machine.
To Next Page
Loading...
