sunsation SUN 3000 - Component Specifications for SUN 3000;5000 Series

13
Increase the value and
extend the life of your
awning fabric with a
protective hood cover that
protects against wind, rain,
hail, and other debris.
Arms are made of alumi-
num extrusion and use
twin cables for added
strength. These cables
are made of stainless
steel and covered with
PVC, which allows heavi-
er tension and longer
outdoor life even at the
most extreme outdoor
conditions.
The newly de-
signed front profile
adds straight, crisp
and distinctive
style to the overall
appearance.
An extensive
variety of fabrics,
both solid colors
and stripes, and
many valence
styles are available.
The roller tube is
made of corrosion
resistant aluminum.
It installs more easi-
ly and provides less
stress on the bolts
and frame - so it lasts
longer too!
Roller support comes
standard with all
models 18’ or wider
to ensure superior
strength and durability.
The super-ecient
roller gear is truly top-
of the-line. That means
less strain in both mo-
torized and manually
operated models – and
many years of trou-
ble-free use!
Reach up to 36’
width when using a
center bracket for
extra support. The
two connected roller
tubes with only a
one inch gap. (24’
standard max width)
Arm-Pitch Control Made
of corrosion resistant
aluminum extrusion. Far
superior to the industry
standard of aluminum
die casting. Additionally,
with it’s unique self-
pitch feature, homeown-
ers will be able to adjust
the self pitch to their
desired height by simply
cranking the gear at the
Pitch Control.
A level is added to each arm
where it is attached to the
front profile, this unique ad-
dition makes installing your
awning easy and accurate
within minutes.
16' 6" Max Projection
With the 5000 series
35˚
0˚
SUN 3000 / 3000 C / 3000 X / 5000
Component Specications