SunSetter Platinum Series - APPENDIX D: Resetting Remote Communication and Reprogramming the Motor; PREPARE MOTOR; SET THE CLOSED AND OPEN POSITIONS

26
APPENDIX D


as erase and reprogram the Open and 

Open and Open and 


To ADD an 
• 

• On the 
To DELETE

WARNING: ALL STEPS MUST BE FOLLOWED EXACTLY AND COMPLETELY.
1. 
2.  
3. 
4. 
5. 
6. 
 


8. CLOSE and OPEN
  
9. OPEN 

10.  
OPEN 
11. 
12.  and OPEN Open.
13.  the Awning at the desired Open
14. Open
15.  and CLOSE 
begins to .  at the 
16.  Open
and 
SET PROPER DIRECTION OF MOTOR ROTATION
SET THE CLOSED AND OPEN POSITIONS


OPEN or CLOSE 
18. OPEN and CLOSE 
FINALIZE PROGRAMMING OF MOTOR

OPEN


CLOSE








Channel

