WTP-801 User Manual
When pulling out the adapter, please pinch the shell of power adapter and pull the switch up, when the
switch is fully opened then pull out the power adapter.
Don’t put forth your strength to pull the plug by squeezing any place of power adapter. Because it is
more difficult to pull it out and easy to damage the cable.
Notes:
1) Please only use the power adapter recommended by supplier or equivalent products.
2) When disconnecting the power adapter plug, handhold plug connector housing and avoid
pulling on the cable in force.
3) Avoid dragging the power adapter cable, otherwise it will damage the cables, causing fire and
shock.
4) Avoid putting power adapter around a heating device, otherwise the cable may melt, causing
fire and shock.
5) If you do not use the printer in a long time, disconnect the power supply of printer power
adapter.
To Next Page
Loading...
