WTP-801 User Manual
● Long Beeping After cutting:
① Disable: there is no sound after cutting
② Use printer buzzer (The beeping time, times and interval time can be set for what you want,
such as 2 milliseconds, 3 milliseconds or 4 milliseconds, etc.):
The following setting is set as an example:
When cutting one piece of paper each time, the printer will emit the “Beep” for one time, and
the beeping time is two milliseconds and beeping interval is three milliseconds.
● Buzzer Volume:
The “Very Low” is the minimum sound, and the “Loud” the maximum sound. You can select a
volume level and click "Setting" to print (Default: "Standard" level).
To Next Page
Loading...
