4) Using the body supporter [UH1506D-45]
Adjust the supporting bolt of the body supporter at the center of the machine after you are finished with
leveling. When adjusting the bolt, turn it until the bolt touches the level base and turn an additional quarter
round. Fasten the bolt with a nut.
[Fig.2-4]
Adjusting bolt
[CAUTION]
The supporter reduces the machine vibration.
Make sure not to adjust the bolt too high - it may lift the machine.
5) Using the auxiliary balance supporting bolt [UH1508-45, UH1512D-45]
Adjust the supporting bolt at the center of the machine after the balancing of the machine is finished. When
adjusting the supporting bolt, turn the bolt until it touches the level base and turn an additional quarter round.
Fasten the supporting bolt with a nut.
[Fig.2-5]
Adjusting bolt
[CAUTION]
The use of a supporting bolt for the auxiliary body supporter reduces the machine vibration and maintains
the balance of the machine.
Make sure not to adjust the bolt too high. It may lift the machine.
To Next Page
Loading...
