2-6) FRAME ASSEMBLY (UH1506D-45)
2-6-1) Tubular Frame
1) Adjust the table height appropriate for tubular frame work (see 2-5 Table Assembly).
2) Unfasten the fixing bolt of the tubular frame. Align it on the fixing position on the X frame, insert the frame
fixing bolt, and fix.
[Fig.2-12]
Tubular frame
X frame
Fixing
bolts
[Fig.2-13]
Tubular round frame
3) In case using the tubular round frame
[CAUTION 1]
When inserting the frame onto the arm of the tubular frame, adjust the space between the two. To
adjust, use the screw on the tubular frame arm.
To Next Page
Loading...
