20
66
Sewing
[ Caution ]
·Wear protective gears for safety. Operation without them may lead to physical injuries.
·Turn off the machine in the following situations.
If the operator mistakenly steps on the pedal with the plug in, the machine will start automatically and can cause severe
injuries.
·When inserting upper thread
·When replacing bobbin or needle
·When the machine not in use or the operator leaving the work place.
6-1. Sewing
1. Press ON button of power switch ①.
2. Lamp on the program unit ② turns on and machine is ready
to operate.
3. Control sewing conditions by using program unit ②.
(See user’s manual of Fortuna IV.)
4. Step on the pedal to operate.
6-2. Back tack (reverse) sewing
1. Pressing the reverse switch ① or reverse lever ② will move
sewing material backward. Sewing material will go forward
if either of them is not being pressed.
[ Figure 27 ]
①
①
②
②
[ Figure 26 ]
To Next Page
Loading...
