11
[ Figure 6 ]
4-2. Installing machine body
1. Control box
1) As in the Figure, attach control box ① to the lower part
of table with four bolts ②.
[ Figure 7 ]
2. Pedal switch and connecting rod
1) Attach pedal switch ① to pedal switch bracket ② with
four bolts ③.
2) As in the Figure, attach pedal switch bracket ② to the
lower part of table.
3) Connect one end of the connecting rod ④ with pedal
switch and the other end with pedal, and then adjust
length of the rod.
①
①
②
④
③
②
To Next Page
Loading...
