12
3. Oil Pan
1) Fix two head hinge rubber (B) ① to the rear side of table
with nails ④.
2) Fix two head hinge rubber (A) ② to the front side of
table with nails ④.
3) Insert four head hinge rubber (c) ③ into four holes of oil
pan⑤.
4) Place safely oil pan ⑤ assembled with cushion rubbers
into the rectangular hole on the table.
5) Insert knee lifting support cap ⑥ into oil pan’s projecting
hole ⑦ as in the figure.
4. Hinge Rubber
1) As in the figure, assemble two-hinge rubbers ① on the
table.
2) As in the figure, fix the hinge rubbers with nails ②.
[ Figure 8 ]
①
②
④
⑤
③
④
[ Figure 9 ]
①
①
②
②
To Next Page
Loading...
