ⓐ
ⓔ
ⓑ
ⓓ
ⓒ
5
KM-2300 Series is made to sew patterns on fabrics and other similar materials for industrial
use.
Follow the following indications when operating the machine.
ⓐ Read through this manual carefully and completely before operating the
machine.
ⓑ Wear proper clothes for work.
ⓒ Keep hands or other parts of the body away from the machine’s operation
parts(needle, shuttle, thread take-up lever, pulley, etc.) when the
machine is operating.
ⓓ Keep the covers and finger guard on the machine during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Turn off the main power and check if the switch is turned “off”
before opening electric boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ If possible, install the machine away from source of strong electrical noise
such as high frequency welding machines
1-4) Operating
machine
Warning
Notice
[ Warning ]
Keep motor cover in place before operating, turn off power before inspecting or adjusting.
1-5) Safety devices
ⓐ Safety label : It describes cautions during the machine operation.
ⓑ Thread take-up cover : It prevents any contact between body and take-up lever.
ⓒ Motor cover : A device to prevent hands, feet and clothing from getting jammed by the
motor.
ⓓ Label for specification of power : It describes cautions for safety to protect electric shock
during the motors’ rotation. (Voltage input / use Hz)
ⓔ Finger guard : It prevent contacts between finger and needle.
To Next Page
Loading...
