8) Adjusting the parts of thread release 23
9) Adjusting the parts of wiper 24
10) Adjusting the parts for trimming 27
11) Adjusting the devices for main thread adjustment 29
12) Adjusting the winder devices 29
13) Setting up the synchro position(C Series) 30
14) Mounting the Direct Motor and Adjusting Method(D Series) 31
15) Setting up the X-Y origin 31
16) How to adjust the feeding plate 32
17) Checking the setting position of button clamp 32
18) How to set up the button clamp adjusting plate 33
19) How to attach the spacer spring plate 33
7. Cause of Breakdown and Troubleshooting 34
8. Pattern List 36
9. Drawing of Table 37
1) SPS/D-B1202 37
2) SPS/C-B1202 38
10. Gauge List 39
11. Option List 39
To Next Page
Loading...
Need help?
General
