95
■ DESIGN FILTERING
LESSON: Select the design in Location #5 and edit the minimum stitch interval to 0.3mm or longer. Then
store in Location #17. Number of stitches in design: 18294
Call design from Location #5 and
press
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
Move the cursor to “3. DESIGN
FILTERING” and then
press
DESIGN FILTERING
LENGTH = 0.1 [mm]
Use the cursor key to set the
interval to 0.3mm.
Press
DESIGN FILTERING
LENGTH = 0.3 [mm]
Use the cursor key to select
Location #17. Then press
Press to check.
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
SELECT EMPTY ROOM
===> # 17
14] 11113
15] 10898
16] 55961
17] 17550
It can be seen that the number of stitches has
been changed from 18294 to 17550, and that the
changed design has been stored in room no. 17.
To Next Page
Loading...
