97
FRAME MOVEMENT
Press when the operating system loads. The following screen will appear:
■ DATA ORIGIN
The SWF embroidery machine memorizes the position of the frame when it stops (by the stop switch,
detection of thread breaks, etc.) during operation. The user can use the DATA ORIGIN to select a previous
stopping point by using the frame transfer key, allowing work to be done at another location.
ORIGIN : This function moves the frame to the starting point of the design. If you stop the machine and
accidently move the frame, press FRAME, scroll to DATA ORIGIN and press SET.
1. DATA ORIGIN
2. ORIGIN
3. POWER RESUME
A. Starting point of embroidery
B. Stopping point of embroidery
C. Point to which frame has been moved
D. Frame returns to original course
A. Starting point of embroidery
B. Stopping point of embroidery
C. Frame transfer course
To Next Page
Loading...
