106
An output format must be selected
when copying on to the disk. Move
the cursor to “1.SWF” to save in
the SWF type as indicated in the
example. Then, Press
EMB WRITE : 55[%]
[>>>>> ]
Move the cursor to “2.FDD
DELETE” to delete the design
copied onto the floppy disk. And
then Press
1] 18294st
Move the cursor to the selected
design and Press
1. FDD SAVE
2. FDD DELETE
3. FDD FORMAT
1. FDD SAVE
2. FDD DELETE
3. FDD FORMAT
To Next Page
Loading...
