23
START/STOP BUTTONS
Use the START and STOP buttons to:
1) START/STOP DURING OPERATION
1) Start embroidery work or stop the machine during operation.
2) Back up to correct stitching errors.
3) Move forward in the design while the machine is stopped (Use float function).
4) Move backward in the design while the machine is stopped (Use float function).
BUTTON OPERATION
Press START button
Hold START button in
Press STOP button
MACHINE OPERATION
Machine begins to embroider
Machine begins at slow rpm (100 rpm) until you release START
buttons. It then sews at set speed.
Machine stops
CAUTION
Non-stitching operations cannot be performed in the initial moments of
embroidery. If you want to perform non-stitching operations you must press the
STOP button, release it right away, and when the machine goes to STOP MODE,
press the FLOAT button. In the float mode you can select the number of stitches
to move forward or backward.
To Next Page
Loading...
Need help?
General
