SunStar SWF/B-T1201C - Page 62

56
Use the UP and DOWN key to
move the cursor to “DESIGN”
In Location 8.
Press
Press
Check the menu screen to be sure
that the design was called with no
errors.
You can also check this through the
machine data screen.
1] 12372
2] 5954
3] 7281
4] 17325
5] 18294
6] 13826
7] 21064
8] 16850
1. EMB CALL
2. FDD CALL
3. EXTERNAL INPUT
4. EXTERNAL OUTPUT
SPEED : 0[RPM]
0/ 16850[00%]
TOTAL : 258051[ST]
NEEDLE : 1[6] 1