SunStar SWF/B-T1201C - Page 64

58
Move the cursor using the UP and
DOWN keys to “30”.
SELECT EMPTY ROOM
===> # 30
EMB READ : 55[%]
[>>>>> ]
The screen shows the copying progress.
SPEED : 0[RPM]
0/ 7667[00%]
TOTAL : 258051[ST]
NEEDLE : 1[6] 1
1. BASIC SETTING
2. NEEDLE SETTING
= USER SELECT FORMAT =
1. DOS 2.ZSK
2. BAR FMC 4.BAR FDR
3. EXIT OR PREVIOUS
DOS : 2HD, 2DD USUAL DISKETTE
ZSK : ZSK DISKETTE
BAR FMC : BARUDAN FMC
BAR FDR : BARUDAN FDR
EXIT or PREVIOUS : END
DESIGN from room no. 30 has been called.
Function that input automatically
needle bar of ZSK diskette.
(You can select information of
needle bar in case of copy design
of ZSK diskette)
When diskette constantly
appears error, you may select
another diskette to press
ZSK NEEDLE SEQ
MANUAL(0), AUTO(1)
MANUAL SELECT To save previous needle
bar information.
AUTO SELECT To save present needle bar
information of design.
Press
Press