67
BASIC SET-UP FUNCTIONS
When the machine is turned on and the operating system loads, press .
This allows the set-up of basic design changes.
■ X SCALE
This reduces or enlarges the design along the X axis (left to right). The default is 100% and the range
allowed is 50%-200%. Remember that changing the size does not alter the stitch count.
■ Y SCALE
This reduces or enlarges the design along the Y axis (top to bottom). The default is 100% and the range
allowed is 50%-200%.
Design can be enlarged in both the X and the Y direction.
<100%> <200%>
<100%> <200%>
<100%> <200%>
To Next Page
Loading...
