SunStar SWF/B-T1201C - Page 81

75
LESSON: Select the design stored in Location #5 and perform a DESIGN TRACE.
Use the EMB CALL function to call
the design stored in Location #5.
Press
Use the cursor key and select
“2.DESIGN TRACE”.
Then, press
When TRACE is finished,
press
The abobe screen appears and the frame moves.
SPEED : 0[RPM]
0/ 1991[00%]
TOTAL : 258051[ST]
NEEDLE : 1[6] 1
1. BOBBIN WINDING
2. DESIGN TRACE
3. LENGTH MEASURE
4. OPTIMIZE TRACE
FRAME TRACE