77
■ OPTIMIZE TRACE
OUTLINE OF DESIGN (ACTUAL TRACE)
This function follows the actual outline of the design when the design selected is to be stitched in the
selected hoop. This will take longer than a Design Trace. It will follow precisely the outline of current
design, verifying if it will fit in the hoop selected.
Select “4, OPTIMIZE TRACE”
By using cursor movement key and
press
1. BOBBIN WINDING
2. DESIGN TRACE
3. LENGTH MEASURE
4. OPTIMIZE TRACE
DESIGN CALCURATE
[>>>>> ]
FRAME TRACE
Press
Call the design in Location #5 by
using the design call function.
SPEED : 0[RPM]
0/ 1991[00%]
TOTAL : 258051[ST]
NEEDLE : 1[6] 1
To Next Page
Loading...
