SunStar SWF/B-T1201C - FRAME MOVEMENT FUNCTIONS

91
After stitch 700 is selected as
above, and the EDIT mode is
started. The following screen
appears.
=== STITCH EDIT ===
X DATA : 3
Y DATA : -33
FUNCTION : NORMAL(0)
Press twice to correct the
function code.
=== STITCH EDIT ===
X DATA : 3
Y DATA : -33
FUNCTION : NORMAL(0)
Press the numerical key “1” to
correct the color changing code.
=== STITCH EDIT ===
X DATA : 3
Y DATA : -33
FUNCTION : C/C(1)
The following data are needed to correct the
function code.
0 󱈓 General code(NORMAL)
1 󱈓 Color change code(C/C)
2 󱈓 Jump code(JUMP)
3 󱈓 Finish code(END)
No corrections are required in our
example so press
500] 3 -33 N
501] 3 -32 N
DEL INS EDIT
The stitch 500 data has been corrected as
indicated in the example.