Harness User’s manual
SUP’AIR _STRIKE_ Page 10
Using the seat-plate. :
Seatplate description. :
Front
Rear
1. Open the zip-
per of the pocket
located beneath
and at the front of
the seat.
2. Open the
velcro located
at the top of
the pocket and
access the seat-
plate compart-
ment.
3. Insert the
seatplate in its
compartment
and close the
velcro.
Flying
with the plate gives a tighter seating posture and transfers the wing’s imputs more precisely. The seatplate equally contributes
to heightened overall comfort without lateral hip pressure.
Flying
without the seatplate brings a more flexible seating area following the pilot’s body shape while slightly rising the carabiners at-
tachment points. The harness is slightly more neutral and overall stable. Without the seatplate the harness feels tighter.
Note that in case of a situation beyond the wing’s safety limitations, toggle control must compensate for the lack of pressure and preci-
sion given by a seatplate.
Installing the seatplate. :
MINI carbon fiber seatplate 30x 22cm
Reference : MPPL021
The STRIKE can be used with or without the carbon fiber seatplate.
>> 2. Seatplate
zip
velcro
Profile view :
Top
Bottom
Rear
Front
Accessories assembly.
To Next Page
Loading...
