SUPAIR Strike - Speed-Bar System

Harness User’s manual
SUP’AIR _STRIKE_ Page 12
STANDARD double stage speed-bar/accelerator.
Accessories assembly.
>> 4. Speed-bar system. (option)
Compatible accelerator/speed-bar. :
Ref. : ACCELPOULIE, ACCELERATEUR 2B SPEEDBAG LIGHT
Speedbar assembly. :
1. Push the retaining elastics
through the grommets found
at the far end of the speed-
bag and knot them securely.
2. Push the accelerator/
speed-bar line through the
pulley connected to the lateral
panel ( #11 ).
3. Pull the line through the side
skirt opening slit.
4. Finally, attach a hook to the
cord before connecting it to
the glider’s speed-bar/acce-
lerator.
5. Simulate the speed-bar/
accelerator’s functionality
by sliding the cord back and
forth.
1
2
3
Regarding either side of the harness: