Harness User’s manual
SUP’AIR _STRIKE_ Page 22
Pre-Flight control.
• Inspect the harness and the carabiners for possible wear and tear.
• Be certain for the handle cables to be securely fastened in place inside their respective reserve parachute pocket housings.
• Check that your personal settings haven’t changed.
• Check that all zippers and buckles are closed.
• Check that the speedbar is correctly connected and adusted.
• Check that no rigging line or other object comes in contact and interfere with the rescue parachute handle.
• Make sure that the self-locking carabiners are locked and connected to the paraglider.
• Be certain for the accelerator/speed-bar line not to ride through the reserve parachute handle.
Takeoff
Flight phases.
Do not let go the brakes when close to terrain.
After a thorough weather conditions analysis was conducted and the decision to fly was made, put your harness on and follow the
next steps :
• Start by putting on the right leg
• Fully close the leg strap and chest strap buckles..
• Close the Speed-bag, then the chest strap.
• Takeoff maintaining a vertical posture and push yourself inside the harness but only once away from the ridge.
To Next Page
Loading...
