SUPAIR Strike - Speedbag

Harness User’s manual
SUP’AIR _STRIKE_ Page 11
Accessories assembly.
>> 3. Speedbag
1. Pass the main attachment points through the dedicated holes in the speedbag.
Caution : do not confuse with the speed system exit holes
2. Install the speedbag straps through the Tensionlock®
buckles located on each side of the harness.
4. Once you have put
the harness on, close
the leg and chest
straps, then close the
speedbag starting
with the left pannel.
3. Foot-plate