Version 2.0 – 08/2018
14
4
5
3
2
1
3
3 Getting Started – 3.2 Initial Setup
5. Tap on the Time format button
5
. The nu-
meric key panel
6
pops up. Now you can
enter the time.
6. Tap on OK
7
to confirm.
7. Tap on the Arrow button
8
to choose the
country-specific basic time setting. The time
format can be set and displayed for EU and
US.
8. Tap on the Arrow button
9
to choose the
decimal separator "."/"," used in your coun-
tr y.
9. Tap on the Save button
10
to confirm.
5
6
7
8
9
10
3.2.5 Self-test
Following language, date and time setup the
spectrophotometer performs a self-test.
1. Remove all cells and close the cell compart-
ment cover.
2. Start the self-test with the Start button
1
.
3. The spectrophotometer performs the self-
test.
Self-test
The self-test covers:
• Checks on memory, processor, internal inter-
faces, filter and lamp
• A calibration of the wavelength
When the self-test has ended, the display shows
the main menu.
1
To Next Page
Loading...