Need help?Do you have a question about the Supelco Spectroquant Prove Series and is the answer not in the manual?
General| Type | Spectrophotometer |
|---|---|
| Resolution | 0.001 A |
| Wavelength Accuracy | ±1 nm |
| Photometric Range | 0 - 3.0 A |
| Interfaces | USB |
| Measurement Range | 0 - 3.0 A |
| Detector | Silicon photodiode |
Defines the authorized usage of the spectrophotometer for photometric measurements and water analysis.
Outlines the sequence of steps required for the initial setup of the spectrophotometer.
Explains the self-test procedure, its components, and what happens after it completes.
Details the procedure for turning the spectrophotometer on, including the boot process and self-test initiation.
Explains the necessity and process of performing a zero adjustment for preprogrammed methods.
Lists the types of measurements the spectrophotometer can perform, including concentration, spectrum, and kinetics.
Details the procedure for inserting round cells for measurement, including alignment and result display.
Explains how to insert rectangular cells (10, 20, 50 mm) into the cell compartment for measurement.
Details the process of inserting 100 mm rectangular cells into the cell holder for measurement.
To Next Page