Supelco Spectroquant Prove Series - Switching Spectrophotometer Off

Version 2.0 – 08/2018
16
4
5
3
2
1
The spectrophotometer automatically switches
off the backlight of the display
3
when no but-
ton has been tapped within a period of 10 min-
utes. The backlight is switched on again with the
next tap.
The button functions are activated only following
a further tap.
NOTE
You can set a user-defined time for this function
(please see the Operating Manual for detailed in-
structions).
Switching off
Press the ON/OFF button
4
to switch the spectro-
photometer off.
Energy-saving mode – display
NOTE
The instrument has an Auto-Power-Off function,
which switches it automatically off after a user-
defined time. This function is not active out of
the box, but you can turn it on in "System (In-
strument settings)".
4
3
4 Operation – 4.1 Switching the Spectrophotometer On or Off
4