Supelco Spectroquant Prove Series - Types of Measurements

Version 2.0 – 08/2018
20
4
5
3
2
1
4 Operation – 4.4 Measurements
4.4 Measurements
The spectrophotometer can be used to perform the measurements listed below.
Type of Measure-
ment
Description
Concentration • Preprogrammed methods that can be executed using Spectroquant
®
test
kits or self-prepared reagents
•• User-programmed methods
Absorption /
transmission
• Single-wavelength measurements for establishing the absorbance or
transmission of solutions
• Multiple-wavelength measurements for establishing the absorbance or
transmission of solutions
Spectrum • Programmed methods for establishing the absorbance or transmission of
solutionsoveradenedwavelengthrange
Kinetics • Programmed methods for establishing the absorbance or transmission of
solutionsoveradenedperiod
Quality checks Instrument supported analytical quality assurance:
• Instrument check (AQA 1)
•Method-specicsystemcheck–preprogrammedforallSpectroquant
®
standards (AQA 2)
• Pipette volume control (PipeCheck)
• Check interferences from foreign substances (MatrixCheck)
4