Supelco Spectroquant Prove Series - Performing Measurement with Rectangular Cells (10-50 mm); Performing Measurement with 100 mm Rectangular Cells

Version 2.0 – 08/2018
22
4
5
3
2
1
4
4 Operation – 4.4 Measurements
Measuring with rectangular cells with open
lid:
Insert 100 mm rectangular cells (Prove 600)
• Remove the top of the round cell compartment
including the AutoSelector
10
• Insert the 100 mm rectangular cell vertically
into the cell holder
11
. Make sure that you hold
it with both hands on the small edges while
inserting it carefully
• Measurement starts automatically, and the
measurement result is displayed in the con-
centration measurement overview (see page
7)
NOTE
Please see Analytical Procedures and Appendices
for detailed measurement procedures.
Measuring with rectangular cells with open
lid:
Insert rectangular cells (10, 20, 50 mm)
• Insert the rectangular cell vertically into the
cell compartment
8
, ensuring that the cell is
flush against the left side of the cell holder
9
at all times
• Measurement starts automatically, and the
measurement result is displayed in the con-
centration measurement overview (see page
7)
11
10
8
9