9
Please read all assembly instructions in full before beginning the build of your new
bike.
DANGER!
Please read the instructions entirely before assembly to ensure the proper
functioning of the Super73. Failure to do so could result in serious injury or death
and the risk of potential injury to those around the user.
TIP
VIDEO
View our assembly video to follow step-by-step instructions on our website at
support.super73.com
GETTING STARTED
!
IN THE PACKAGING
• 1 x lithium-ion battery
• 2 x keys for the battery
• 1 x battery charger
• 1 x set of pedals
• 1 x two-sided open-end wrench with 15mm and 13mm ends
• 1 x 5mm hex wrench
ADDITIONAL RECOMMENDED TOOLS:
• 2.5 mm hex wrench
• 4 mm hex wrench
GOOD TO KNOW:
• Bolts for the handlebars mount are M6 X 12mm socket head cap screws.
• Right pedal has the letter “R” inscribed on it, the left pedal has the letter “L”
inscribed on it.
• 5mm Allen key can also be used to adjust brakes.
• Tire inner tube size is 20”x 4.25” or 20”x 4” for the rear and front with
Schrader valve.
Before performing any work on your Super73, turn off the power system and remove
the battery. Be sure to also turn off the power system and remove the battery
during transport in a vehicle. Involuntary activation of the pedal assistance system
presents a risk of damage or injury.
DANGER!
!
If any serious damage has occurred to your Super73 during transit, please submit
photos to Super73 directly by emailing us at customercare@Super73.com
To Next Page
Loading...
