22
A properly fitting ANSI or SNELL, approved bicycle safety helmet, that complies with
your local laws and regulations, should be worn at all times when riding your electric
balance bike. Always wear a properly fitted helmet that covers the forehead when
riding a SUPER73-K1D.
Brakes are an integral part of the operation of your electric balance bike and must be
properly maintained, adjusted, and replaced when necessary. If any of these tasks are
not within your skill set, we recommend taking your SUPER73-K1D to a professional
cycle mechanic.
HELMETS
BRAKES
The hydraulic brake system requires proper maintenance to be performed on the pads,
rotors, and also on the hydraulic brake line. Always verify that your brakes are in good
condition in order to maintain safe riding.
For optimum braking performance, Super73 bikes are equipped with disc brakes.
The SUPER73-K1D is equipped with only a rear brake with the brake lever positioned
on the left handle.
To ensure maximum service life of the brake components, avoid contamination of the
pads and the disc by greasy substances.
Regularly check the condition of your cables, ducts, and harness, and the wear of your
pads.
Some discs are only compatible with “resin” pads. Do not use a metal pad with discs
marked “resin”.
For better ergonomics and safety, we advise you to adjust the brake levers in a
position that places it as a natural extension of the user’s arms. If you have any
questions or concerns, please contact Super73.
!
To Next Page
Loading...
