15
1. WHEELS
Check the condition of both tires making sure the tread is in good
condition free from punctures, cracks, and deformations.
Maintain proper tire pressure. We recommend a range of 20-25 psi (1.38-
1.72 bar) dependent on the weight of rider and type of terrain.
Ensure wheels are true and properly dished.
Make sure that the wheels are properly seated in the dropouts and that
the wheel nuts are tight and secure.
Check proper wheel alignment and that derailleur is not bent.
2. BATTERY
Check that the battery is inserted securely: push the battery into its
holder until it clicks into the lock. Remove the key from the lock and pull
the battery to check if it has indeed locked into place.
Check the charge status of the battery. Familiarize yourself with battery
charging and storage best practices.
3. BRAKES SYSTEM
Pull both brake levers. You should feel an obvious pressure point and the
levers should not be able to touch the handle.
4. LIGHTING (if applicable)
Check if the front and rear lights are working properly. Do not cover any
lighting or reflectors.
5. CABLES
Look out for any loose cables.
Make sure the male and female plugs are properly connected.
There should be no strain on any wiring near the fork when turning the
handlebars from left to right.
Verify that the wiring on the frame is secure and free from any moving
parts that may damage the wiring. This includes any wires and brake cable
lines near the wheel or other moving parts.
6. DISPLAY
Check that your display turns on and functions properly.
7. KICKSTAND
Make sure that the kickstand is tightly secured, and not rubbing against
the ground or tires.
Do not sit on a bike with a kickstand engaged as this can bend its bracket.
Make sure the brakes have already been applied before getting on to your bike. If
the assistance mode is turned on, your E-Bike will start moving as soon as you push
on the pedal. The unfamiliar push can otherwise cause a fall, hazard, or accident.
PRE-RIDE SAFETY CHECKLIST
DANGER! Use the following checklist before each ride to verify your bike is safe to
ride. Never operate your bike and use your app simultaneously.
!
!
To Next Page
Loading...
