25
In order to prolong the life expectancy of your bike, here is an example of a
maintenance schedule, under intended use, that we recommend the following:
1. BEFORE AND AFTER EACH RIDE
Check wheel alignment
Check the state of charge of the battery
Check that brakes function properly
Check tires for any punctures
Store the bike carefully in a clean and dry place
Check that your kickstand is tightly secured
Check for loose cables or wires that may be strained when turning the
front wheel from left to right
2. MONTHLY
Inspect the handlebar and steer tube for any unusual movement
Check the cables, tires, handles
Check the wear of brake rotors, brake pads, and replace them if necessary
Check the tension of the spokes, and ensure that the wheels are true and
properly dished
Lube the chain and check the tension in the chain. It should be tight
enough that it only allows you to move it up and down about one inch. If it
is sagging or much looser than that, you need to tighten the chain.
Inspect suspension components for wear and make any necessary
adjustments
3. EVERY SIX MONTHS (depending on frequency and type of use)
Inspect the frame, fork and look for signs of cracks in the metal
Check the bottom bracket and crankshaft, tighten the bolts on each crank
Check and grease the wheel hubs, headset, all parts in friction
Grease suspension components and tighten any necessary hardware
For your own safety, if any of the recommended maintenance procedures
are not within your skill set, we advise taking your Super73 to an E-bike
specialist or professional cycle mechanic for inspection.
DANGER!
Intensive use of the Super73 may cause possible damage to the frame and the
fork. It is important to inspect the frame and the fork and look for signs of
cracks. A broken or cracked frame and fork can cause an accident and injury.
MAINTENANCE SCHEDULE
TIP
To Next Page
Loading...
