9
Please read all assembly instructions in full before beginning the build of your
new bike.
DANGER! Please read the instructions entirely before assembly to ensure the
proper functioning of the Super73. Failure to do so could result in serious
personal injury or damage to the bike.
TIP
VIDEO
View our assembly video to follow step-by-step instructions on our website at
support.super73.com or here: https://youtu.be/_vTpHR6x5WQ
GETTING STARTED
IN THE PACKAGING
1 x lithium-ion battery
2 x keys for the battery
1 x battery charger
1 x set of pedals
1 x two-sided open-end wrench with 15mm and 13mm ends
1 x 5mm hex wrench
ADDITIONAL RECOMMENDED TOOLS:
2.5 mm hex wrench
4 mm hex wrench
GOOD TO KNOW:
• Bolts for the handlebars mount are M6 x 12mm socket head cap screws
• Right pedal has the letter “R” inscribed on it, the left pedal has the letter
“L” inscribed on it.
• 5mm Allen key can also be used to adjust brakes.
• Tire tubes size is 20”x4.5” for the rear and front tires with Schrader valve.
In the following instructions, “Tighten” or “hand tighten” means tightening a
part with care to not over-tighten and damage threads.
Before performing any work on your Super73, turn off the power system and
remove the battery. Be sure to also turn off the power system and remove the
battery during transport in a vehicle. Involuntary activation of the electrical
assistance system presents a risk of damage or injury.
DANGER!
!
!
!
If any serious damage has occured to your Super73 during transit, please submit
photos directly to Super73 by emailing our customer service department.
To Next Page
Loading...
