Superchips Flashcal - PRODUCT UPDATES USING IGNITION

1 Double-click the Ignition Icon located on your computer’s desktop.
2 Connect your device to the computer using the supplied USB cable.
(Ignition will automatically search for updates related to your device.)
3 Click the Update button.
(The update process will start and nish automatically. Once the update is
complete, you may be directed to the Online Store. To further update your
device using the online store, refer to the following steps.)
4 Click on any or all of the available options.
(A check mark will appear in the upper right corner.)
5 Click the Purchase button.
6 If required, read and Accept the disclaimer.
7 Fill in the required information and click Go to Review.
(Here you can check the information you lled in before submitting the order.)
8 Click the Place Order button to complete your order.
9 If a purchase was made, follow steps 1-3 above to complete the update.
8
PRODUCT UPDATES USING IGNITION